LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Corolla CE, Automatic >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tire & Wheel >> Tire And Wheel System >> Inspection

Tire And Wheel System: Inspection

  1. INSPECT TIRE 
    1. Check the tires for wear and proper inflation pressure.

      Cold tire inflation pressure: 

      TIRES FOR WEAR AND PROPER INFLATION PRESSURE SPECIFICATION

      Tire size Front kPa (kgf*cm2 , psi) Rear kPa (kgf*cm2 , psi)
      P185/65R15 86S
      P195/65R15 89S
      P195/65R15 89H      		 210 (2.1, 30) 210 (2.1, 30)
      P195/55R16 87V 220 (2.2, 32) 220 (2.2, 32)
    2. Using a dial gauge, check the tire runout.

      Tire runout: 

      3.0 mm (0.118 in.) or less 

    Fig 1: Checking Tire Runout
    G05001336Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. ROTATE TIRE 
    1. Rotate tires as show in the illustration.
    Fig 2: Identifying Tires Rotation Diagram
    G05194712Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSPECT WHEEL BALANCE 
    1. Check and adjust the off-the-car balance.
    2. If necessary, check and adjust the on-the-car balance.

      Imbalance after adjustment: 

      8.0 g (0.018 lb) or less 

      Fig 3: Identifying Wheel Balance Machine
      G04944267Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSPECT BEARING BACKLASH 
  5. INSPECT AXLE HUB DEVIATION 
scientia non olet · About LEMON Manuals