LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Corolla CE, Automatic >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning >> Compressor And Magnetic Clutch >> Disassembly

Compressor And Magnetic Clutch: Disassembly

  1. REMOVE MAGNETIC CLUTCH ASSEMBLY 
    1. Place the compressor and magnetic clutch in vise.
    2. Using SST remove the bolt.

      SST 95047-10310 

      Fig 1: Removing Bolt
      G05195385Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the magnetic clutch hub and magnetic clutch washers.

      HINT:

      There is no set number of magnetic clutch washers since they are used for adjustment.

    4. Using a snap ring expander, remove the snap ring and magnetic clutch rotor.
    5. Remove the screw, disconnect the connector.
      Fig 2: Removing Snap Ring And Magnetic Clutch Rotor
      G04966110Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    6. Using a snap ring expander, remove the snap ring and magnetic clutch stator.
      Fig 3: Removing Snap Ring And Magnet Clutch Starter
      G05195387Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals