Clutch Release Cylinder: Removal

WARNING: This page is about a different variant/trim than selected.

DRAIN CLUTCH FLUID
DISCONNECT CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE
1. Using SST, disconnect the flexible hose tube.
  HINT:
  
  Use a container to catch the fluid.
  
  SST 09023-00101
Fig 1: Disconnecting Flexible Hose Tube
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CLUTCH RELEASE CYLINDER ASSEMBLY
1. Remove the 3 bolts, clutch release cylinder assembly and tube bracket.
  
  Fig 2: Removing Clutch Release Cylinder Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002