LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Corolla CE, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System (1ZZ-FE) >> Water Pump >> Installation

Water Pump: Installation

  1. INSTALL WATER PUMP ASSEMBLY 
    1. Install a new O-ring into the timing chain cover.
      2. Fig 1: Identifying Timing Chain Cover O-Ring
      G05193382Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the water pump with the 6 bolts.

      Torque: Bolt A 

      9.0 N*m (92 kgf*cm, 80 in.*lbf) 

      Bolt B 

      11 N*m (112 kgf*cm, 8 ft.*lbf) 

      3. Fig 2: Locating Water Pump Bolts
      G05193385Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL GENERATOR ASSEMBLY  (See GENERATOR )
  3. INSPECT FOR COOLANT LEAK  (see COOLANT )
  4. CHECK FOR ENGINE COOLANT LEAK  (see ON-VEHICLE INSPECTION )
  5. INSTALL ENGINE UNDER COVER RH 
scientia non olet · About LEMON Manuals