Engine Cooling System (1ZZ-FE): Radiator: Removal
- DRAIN ENGINE COOLANT (see COOLANT )
- DISCONNECT RADIATOR HOSE INLET
- DISCONNECT RADIATOR HOSE OUTLET
- DISCONNECT OIL COOLER INLET HOSE NO.1 (for Automatic Transaxle)
- DISCONNECT OIL COOLER OUTLET HOSE NO.1 (for Automatic Transaxle)
- REMOVE RADIATOR ASSEMBLY
- Disconnect the fan motor connector.
- Disconnect two clamps for wire-harness from fan-shroud.
- Remove the two fan mount bolts.
- Remove the fan w/ motor.