Charging System (1ZZ-FE): Generator: Removal
- DISCONNECT BATTERY NEGATIVE TERMINAL
- REMOVE ENGINE UNDER COVER RH
- REMOVE FAN AND GENERATOR V BELT
(See
REMOVAL
)
- REMOVE GENERATOR ASSEMBLY
- Remove the terminal cap No. 2.
- Remove the nut [B], then remove the generator wire.
- Disconnect the generator connector [C].
- Remove the wire harness clamp [D].
- Disconnect the A/C connector [E].
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Remove the 2 bolts, then remove the generator.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002