LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Avalon XLS >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Brake Master Cylinder >> Removal

Brake Master Cylinder: Removal

  1. DRAIN BRAKE FLUID 
    NOTE: Wash brake fluid off immediately if it adheres to any painted surface.
  2. REMOVE AIR CLEANER ASSEMBLY 
  3. REMOVE BRAKE MASTER WITH PLATE CYLINDER SUB-ASSEMBLY 
    1. Disconnect the level warning switch connector.
    2. Using SST, disconnect the 6 brake tubes from the brake master w/ plate cylinder sub-assembly.

      SST 09023-00101 

      Fig 1: Disconnecting Brake Tubes To Master Cylinder Sub-Assembly
      G05001674Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 2 nuts, and pull out the 2-way and brake master w/ plate cylinder sub-assembly.
    Fig 2: Removing Master Cylinder Sub-Assembly And Way With Nuts
    G05001675Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals