Front Wiper Motor: Installation

INSTALL WINDSHIELD WIPER LINK ASSEMBLY
1. Install the windshield wiper motor assembly with the 3 bolts.
  Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)
  
  Fig 1: Installing Windshield Wiper Motor Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the rod to the wiper link assembly.
Fig 2: Identifying Wiper Link Assembly Rod
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
1. Install the windshield wiper motor & link assembly with the 4 bolts.
  Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf)
2. Connect the connector.
INSTALL WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH
1. Operate the wiper, and stop the windshield wiper motor assembly at the automatic stop position.
2. Clean the wiper arm serrations.
3. Clean the wiper pivot serrations with a wire brush (before reinstalling).
  
  Fig 3: Identifying Windshield Wiper Motor & Link Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Fig 4: Cleaning Wiper Pivot Serrations
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the FR wiper arm & blade assembly RH with the nut at the position as shown in the illustration.
  Torque: 20 N*m (209 kgf*cm, 15 ft.*lbf)
  
  HINT:
  
  Hold the arm hinge by hand to fasten the nut.
Fig 5: Identifying FR Wiper Arm Installation Position Mark
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH
1. Clean the wiper arm serrations.
2. Clean the wiper pivot serrations with a wire brush (when reinstalling).
  
  Fig 6: Cleaning Wiper Arm Serrations
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the FR wiper arm & blade assembly LH with the nut at the position shown in the illustration.
  Torque: 20 N*m (209 kgf*cm, 15 ft.*lbf)
  
  HINT:
  
  Hold the arm hinge by hand to fasten the nut.
Fig 7: Identifying FR Wiper Arm & Blade Assembly LH Installation Position Mark
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002