LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Prius >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Testing and Diagnosis >> P112 Hybrid Vehicle Control - DTC P0A94 - P3226, U0100 - U0146 >> DTC P3108-594 A/C Amplifier Communication Circuit Malfunction >> Inspection Procedure

Inspection Procedure

  1. READ OUTPUT DTC (CODES ALL) 
    1. Connect the intelligent tester to the DLC3.
    2. Turn the power switch ON (IG).
    3. Turn the intelligent tester ON.
    4. Enter the following menus: DIAGNOSIS / OBD/MOBD / CODES (All).
    5. Read and record CAN communication malfunction DTCs.

      HINT:

      When DTCs other than CAN communication malfunction DTCs are output simultaneously, first correct the CAN communication problem, and then perform troubleshooting for other DTCs.

    GO : GO TO CAN COMMUNICATION SYSTEM 

scientia non olet · About LEMON Manuals