Inspection Procedure

1. Connect the intelligent tester to the DLC3.
2. Turn the power switch ON (IG).
3. Turn the intelligent tester ON.
4. Enter the following menus: DIAGNOSIS / OBD/MOBD / HV ECU / DTC INFO / CURRENT CODES.
5. Read DTCs.

   Result: DTC P0A94 (INF 442) and other DTCs are output 

   HINT:

   If any other codes besides P0A94 (INF 442) are output, perform troubleshooting for those DTCs first.

YES : GO TO RELEVANT  DIAGNOSTIC TROUBLE CODE CHART 

NO : REPLACE INVERTER WITH CONVERTER ASSEMBLY