LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Prius >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Brake Pedal >> Disassembly

Brake Pedal: Disassembly

  1. REMOVE BRAKE PEDAL PAD 
  2. REMOVE STOP LIGHT SWITCH ASSEMBLY 
    1. Loosen the stop light switch lock nut and remove the stop light switch from the brake pedal support.
      Fig 1: Removing Stop Light Switch
      G04474802Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY 
    1. Remove the 2 bolts and brake pedal stroke sensor from the brake pedal support.
      Fig 2: Removing Brake Pedal Stroke Sensor
      G04474803Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE BRAKE PEDAL SUB-ASSEMBLY 
    1. Remove the nut from the brake pedal shaft.
    2. Remove the brake pedal shaft and separate the brake pedal from the brake pedal support.
    3. Remove the 2 brake pedal bushes from the brake pedal.
    4. Remove the brake pedal shaft collar from the brake pedal shaft.
scientia non olet · About LEMON Manuals