Proportioning Valve ASSY: Replacement

REMOVE PROPORTIONING VALVE ASSY
1. Using SST, disconnect the 5 brake tubes from the proportioning valve assy.
  SST 09023-00101
  
  Fig 1: Disconnecting Brake Tubes From Proportioning Valve Assy Using Special Tool
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 bolts and proportioning valve assy from the body.
Fig 2: Removing Bolts And Proportioning Valve Assy From Body
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL PROPORTIONING VALVE ASSY
1. Install the proportioning valve assy with the 2 bolts.
  Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
  
  Fig 3: Installing Proportioning Valve Assy With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using SST, connect the 5 brake tubes to the proportioning valve assy.
  SST 09023-00101
  
  Torque: 15 N.m (155 kgf.cm, 11 ft.lbf)
Fig 4: Connecting Brake Tubes To Proportioning Valve Assy Using Special Tool
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
FILL RESERVOIR WITH BRAKE FLUID (see BRAKE FLUID )
BLEED MASTER CYLINDER (see BRAKE FLUID )
SST 09023-00101
BLEED BRAKE LINE (see BRAKE FLUID )
CHECK FLUID LEVEL IN RESERVOIR (see BRAKE FLUID )
CHECK FOR BRAKE FLUID LEAKAGE