LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Corolla LE, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Combination Meter - Diagnostics >> Terminals Of Ecu >> Combination Meter ASSY >> Notes

Combination Meter ASSY: Notes

Fig 1: Identifying Combination Meter Assy Connector Terminals
G02600277Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
COMBINATION METER ASSY CONNECTOR TERMINALS REFERENCE

Symbols (Terminals No.) Wiring Color Terminal Description Condition Specified Condition
SIGNAL EARTH (C9-1) - Body ground BR - Body ground Ground Always Below 1 Ω
POWER EARTH (C9-2) - Body ground W-B-Body ground Ground Always Below 1 Ω
O/D OFF (C9-3) - Body ground LG - Body ground O/D OFF signal O/D OFF indicator light OFF --> ON 10 to 14 V --> Below 1 V
IG1 + (C9-4) - Body ground R-W-Body ground Ignition switch signal (ON) Ignition switch OFF --> ACC Below 1 V --> 10 to 14 V
+B (C9-5) - Body ground L-W-Body ground Battery Always 10 to 14 V
P-BELT OUT (C9-6) - Body ground L - Body ground Passenger seat belt warning output signal Passenger seat belt indicator light is OFF --> ACC 10 to 14 V --> Below 1 V
FUEL (C9-7) - Body ground Y - Body ground Fuel level signal Ignition switch ON, fuel level is FULL --> EMPTY Below 1 V --> 4 to 7 V
TEMP (C9-8) - Body ground B - Body ground Coolant temperature signal Ignition switch ON, coolant temperature is 90°C (194°F) Pulse generation (See waveform 1)
SI (C9-9) - Body ground W-G - Body ground Speed signal (Input) Ignition switch ON and turn the wheel slowly Pulse generation (See wave form 2)
4P OUT (C9-10)- Body ground V-W-Body ground Speed signal (Output) Ignition switch ON and turn the wheel slowly Pulse generation (See wave form 2)
P-BELT SW(C9-11)-Body ground L-W-Body ground Seat belt condition signal (Passenger side) P-BELT indicator light ON --> OFF Below 1 V --> 10 to 14 V
D-BELT SW(C9-12)-Body ground G-Y - Body ground Seat belt condition signal (Driver side) Driver seat belt indicator light is Blinks --> OFF Below 1 V --> 10 to 14 V
BEAM- (C9-13) - Body ground W-B- Body ground Hi-Beam signal Hi-Beam OFF --> ACC 10 to 14 V --> Below 1 V
BEAM+ (C9-14) - Body ground R - Body ground Hi-Beam signal Hi-Beam OFF --> ACC Below 1 V --> 10 to 14 V
ST (C9-15) - Body ground B - Body ground Starting signal Ignition switch OFF --> START Below 1 V --> 10 to 14 V
KEY SW(C9-16)-Body ground L-B - Body ground KEY Switch signal Key is inserted --> Not inserted Below 1 V --> 10 to 14 V
D DOOR(C9-17)-Body ground R-W - Body ground D door condition signal Driver door OPEN --> CLOSE Below 1 V --> 10 to 14 V
ILL+ (C9-18) - Body ground G - Body ground Tail light signal Light control switch OFF --> ACC Below 1 V --> 10 to 14 V
TACHO (C9-19) - Body ground B - Body ground Tacho meter signal Engine running Pulse generation (See wave form 3)
EXCEPT D DOOR (C9-20) - Body ground R - Body ground Door condition signal (Except for D door) Except driver door OPEN --> CLOSE Below 1 V --> 10 to 14 V
OIL PRESSURE (C9-21)-Body ground W - Body ground Oil pressure signal OIL/P warning light ON --> OFF Below 1 V --> 10 to 14 V
FUEL EARTH (C9-22) - Body ground BR - Body ground Ground (Fuel sender gauge) Always Below 1 Ω
CRUISE (C9-23)- Body ground G-R - Body ground CRUISE signal Ignition switch ON and cruise indicator light ON --> OFF Below 1 V --> 10 to 14 V
TURN L (C9-24) - Body ground G-B - Body ground Turn signal L Ignition switch ON, turn signal LH indicator light OFF --> ACC Below 1 V --> 10 to 14 V
TURN R (C9-25) - Body ground G-Y - Body ground Turn signal R Ignition switch ON, turn signal RH indicator light OFF --> ACC Below 1 V --> 10 to 14 V
OUTSIDE TEMP+ (C9-26) -OUTSIDE TEMP- (C9-30) B-B-L OUTSIDE TEMP signal Outside temperature at 25°C Approx. 2784Ω
6M/T R (C9-27) - Body ground R-B - Body ground 6M/T condition signal (Reverse) 6M/T R indicator light OFF --> ACC Below 1 V --> 10 to 14 V
ILL- (C9-28) - Body ground Y - Body ground Rheostat signal (Light control) Ignition switch ON Pulse generation (See wave form 4)
TPMS (C9-29) - Body ground LG - Body ground TPMS signal TPMS indicator light ON --> OFF 6.7 to 12 V --> Below 1 V
CHG- (C9-31) - Body ground Y - Body ground Charge signal Ignition switch OFF --> ACC 10 to 14 V --> Below 1 V
CHG+ (C9-32) - Body ground B-0 - Body ground Charge signal Ignition switch OFF --> ACC Below 1 V --> 10 to 14 V
CHECK ENGINE (C9-33) - Body ground R-Y - Body ground CHECK ENGINE signal CHECK ENGINE warning light ON --> OFF Below 1 V --> 10 to 14 V
WASHER LEVEL (C9-34) - Body ground L-W - Body ground Washer level signal WASH LVL indicator light ON --> OFF 10 to 14 V --> Below 1 V
BRAKE LEVEL SW (C9-35) - Body ground R-W - Body ground Brake fluid level signal Brake fluid level warning light ON --> OFF Below 1 V --> 8 to 14 V
EBD (C9-36) - Body ground R-Body ground ABS or VSC signal Brake warning light ON --> OFF 6.7 to 12 V --> Below 1 V
ABS (C9-37) - Body ground W-R-Body ground ABS or VSC signal ABS warning light ON --> OFF 6.7 to 12 V --> Below 1 V
TEMP DATA OUT (C9-38) - Body ground R - Body ground Outside temp signal Ignition switch ON Pulse generation (See wave form 5)
AIR BAG (C9-39) - Body ground B-Y-Body ground AIR BAG signal AIR BAG warning light OFF --> ACC 8 to 14 V --> Below 1 V
SLIP (C16-2) - Body ground W - Body ground SLIP signal SLIP indicator light ON --> OFF Below 1 V --> 10 to 14 V
VSC (C16-3) - Body ground V-Body ground VSC signal VSC indicator light ON --> OFF Below 1 V --> 10 to 14 V
HEAD (C16-7) - Body ground R-Body ground Headlight signal Light control switch is OFF --> HEAD Below 1 V --> 10 to 14 V
TAIL CANCEL (C16-9)-Body ground B-Body ground Tail cancel signal (Light control) Tail cancel switch is OFF --> ACC Below 1 V --> 10 to 14 V