LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Corolla CE, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension System >> Front Suspension Bar ASSY Tower >> Disposal

Front Suspension Bar ASSY Tower: Disposal

  1. DISPOSE OF FRONT SUSPENSION BAR ASSY TOWER 
    1. Fully extend the front suspension bar assy tower.
    2. Using a drill, make a hole in the cylinder between A and B as shown in the illustration to discharge the gas inside.
    CAUTION:
    • Be careful when drilling because shards of metal may fly about, so always use the proper safety equipment.
    • The gas is colorless, odorless and non-poisonous.
    Fig 1: Making Hole In Cylinder Between A And B To Discharge The Gas
    G02613959Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals