Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
TYPICAL ENABLING CONDITIONS
| Monitor runs whenever these DTCs not present | See LIST OF DISABLE A MONITOR |
| Battery voltage | 11 V or more |
| Fuel system | Closed loop (for 13 seconds or more) |
| Air-fuel ratio learning control enabling warm up condition | Met |
| Either of the following conditions (a) or (b) met: | |
| (a) Engine RPM | Less than 1,100 rpm |
| (b) Intake air amount per revolution | 0.15 gm/rev or more |