Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
TYPICAL ENABLING CONDITIONS
| Monitor runs whenever following DTCs not present | See LIST OF DISABLE A MONITOR |
| Battery voltage | 11 V or more |
| Vehicle speed | Less than 80 mph (128 km/h) |
| Throttle valve position learning | Completed |
| Either of following conditions, 1 or 2 met: | |
| 1. All of following conditions met: | |
| Intake air temperature (IAT) at engine start | -10°C (14°F) or more, and 56°C (133°F) or less |
| Engine coolant temperature (ECT) at engine start | -10°C (14°F) or more, and 56°C (133°F) or less |
| "ECT at engine start" - "IAT at engine start" | -15°C (-27°F) or more, and 7°C (12.6°F) or less |
| 2. All of following conditions met: | |
| Intake air temperature (IAT) at engine start | -10°C (-14°F) or more |
| Engine coolant temperature (ECT) at engine start | 56°C (133°F) or less |
| "ECT at engine start" - "IAT at engine start" | More than 7°C (12.6°F) |