Wheel And Tire System: Inspection

1. Check the tires for wear and proper inflation pressure.

   Cold tire inflation pressure: 

   COLD TIRE INFLATION PRESSURE TABLE
   
   

   Tire size	Front, Rear (kgf/cm2 , psi)
   P205/65R15 92T P205/65R15 92H 205/65R15 94V P215/60R16 94V	200 (2.0, 29)
   P215/55R17 93V	210 (2.1, 30)

2. Using a dial indicator, check the tire runout.

Tire runout: 1.0 mm (0.039 in.) or less 

Fig 1: Checking Tire Runout Using A Dial Indicator

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

• Rotate tires as shown in the illustration.
• Rotate as shown in (B) if the spare tire is included in the rotation.

Fig 2: Rotating Tires

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Check and adjust the Off-the-car balance.
2. If necessary, check and adjust the On-the-car balance.

Imbalance after adjustment: 8.0 g (0.018 lb) or less 

Fig 3: Inspecting Wheel Balance

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002