LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Camry Base, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Adjustable Pedal Switch >> Inspection

Adjustable Pedal Switch: Inspection

  1. REMOVE ADJUSTABLE PEDAL SWITCH 
    1. Using a screwdriver, remove the adjustable pedal switch, then disconnect the connector.
    Fig 1: Removing Adjustable Pedal Switch Using A Screwdriver
    G04393171Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT ADJUSTABLE PEDAL SWITCH 
    Fig 2: Identifying Adjustable Pedal Switch Connector Terminals
    G04393172Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    ADJUSTABLE PEDAL SWITCH - CONTINUITY TABLE

    Switch position Tester connection Specified condition
    OFF 1 - 2 - 3 Continuity
    FRONT 1 - 3 Continuity
    2 - 4
    REAR 1 - 2 Continuity
    3 - 4
  3. INSTALL ADJUSTABLE PEDAL SWITCH 
    1. Connect the connector.
    2. Install the adjustable pedal switch.
scientia non olet · About LEMON Manuals