Circuit Description
The ABS motor relay supplies power to the ABS pump motor. While the ABS is activated, the ECU switches the motor relay ON and operates the ABS pump motor.
DTC TROUBLE DETECTION TABLE
| DTC No. |
DTC Detecting Condition |
Trouble Area |
| C0273/13 |
Detection of any conditions from 1 to 3:
- Pump motor voltage is 2.0 V or more for 1 sec. or more at motor relay OFF.
- Pump motor voltage is (IG - 4.0 V) or less for 0.1 sec. or more at motor relay ON.
- After the end of the actuation of the motor relay slow down, condition of motor does not meet the specification.
|
- ABS motor relay
- ABS motor relay circuit
|