LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Camry Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Communication System >> Horn System >> Inspection

Horn System: Inspection

  1. INSPECT RELAY (HORN) 
    1. Remove the HORN relay from the engine room R/B.
    2. Check the HORN relay resistance.

      Standard: 

    TESTER CONNECTION AND SPECIFIED CONDITION TABLE

    Tester Connection Specified Condition
    3 - 5 1 kΩ or higher
    3 - 5 Below 1 Ω (when battery voltage is applied to terminals 1 and 2)

    If the result is not as specified, replace the relay.

    Fig 1: Identifying Relay Test Terminals
    G04106826Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals