Front Brake Caliper: Disassembly

Using a screwdriver, remove the 4 cylinder boot set rings and 4 cylinder boots from the caliper.

Fig 1: Removing Cylinder Boot Set Rings & Cylinder Boots

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Prepare the wooden plate to hold the pistons.
   Fig 2: Preparing Wooden Plate To Hold Pistons

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Place the plate between the pistons and insert a pad at one side.
3. Use compressed air to remove the pistons alternately from the cylinder.
   CAUTION: Do not place your fingers in front of the piston when using compressed air.
   Fig 3: Removing Pistons Using Compressed Air

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Using a screwdriver, remove the 4 piston seals from the cylinder.

Fig 4: Removing Piston Seals From Cylinder Using Screwdriver

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002