LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2005 >> Land Cruiser >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Electrical Systems (Troubleshooting) >> Problem Symptoms Table >> COMBINATION METER (Indicator Light):

COMBINATION METER (Indicator Light):

PROBLEM SYMPTOMS TABLE - COMBINATION METER (INDICATOR LIGHT)

Symptom Suspect Area
Cruise control indicator light does not light up.
  1. LED
  2. Combination Meter
  3. Wire Harness
  4. ECM
High-beam indicator light does not light up.
  1. LED
  2. Combination Meter
  3. Wire Harness
  4. Headlight System
Turn indicator light does not light up.
  1. LED
  2. Combination Meter
  3. Wire Harness
  4. Turn Signal and Hazard Warning System
Shift indicator lights do not light up.
  1. LED
  2. Combination Meter
  3. Park/Neutral Position Switch
  4. Wire Harness
Only one shift indicator does not light up.
  1. LED
  2. Combination Meter
Malfunction indicator light does not light up.
  1. LED
  2. Combination Meter
  3. Wire Harness
  4. ECM
ECT PWR indicator light does not light up.
  1. LED
  2. ECT Pattern Select Switch
  3. Combination Meter
  4. Wire Harness
  5. ECT System
2nd start ETCS indicator light does not light up.
  1. LED
  2. Combination Meter
  3. Wire Harness
  4. ECM
Center Diff. lock indicator light does not light up.
  1. LED
  2. Combination Meter
  3. Transfer 4WD Position Detection Switch
  4. Wire Harness
Indicator lights do not light up. (Except Turn, Hi-beam and security)
  1. GAUGE2 Fuse
  2. Wire Harness
scientia non olet · About LEMON Manuals