Section 5 (Rear Seat (Sedan With Separate Type)): Removal

1. Pull up the front portion of the seat cushion.
2. Pass through the rear seat inner belts to remove the seat cushion assembly.
3. Release the seat cushion wire from the center bracket and remove the seat cushion assembly.

Fig 1: Releasing Seat Cushion Wire From Center Bracket

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the 2 clips.
2. Remove the 2 bolts and seatback assembly.
3. Remove the other using the same procedures described above.

Fig 2: Removing Bolts And Seatback Assembly

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the bolt and rear seat side hinge.
2. Remove the other using the same procedures described above.

Fig 3: Removing Bolt And Rear Seat Side Hinge

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the 2 bolts and center hinge from the body.

Remove the bolt and rear seat cushion center bracket.

Fig 4: Removing Bolt And Rear Seat Cushion Center Bracket

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002