LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2005 >> ECHO 2D Sedan, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission Overhaul - U340E & U341E) >> Component Tests >> Torque Converter >> Torque Converter Sleeve Runout Test

Torque Converter Sleeve Runout Test

WARNING: This page is about a different variant/trim than selected.
  1. Temporarily mount torque converter to drive plate. Mount a dial indicator with needle resting on converter sleeve. See Figure. Rotate converter. If runout exceeds .012" (.30 mm), ensure converter is properly mounted to drive plate.
  2. If converter is properly mounted and runout exceeds specifications, replace torque converter. Mark position of converter to ensure correct installation. Remove converter from drive plate.
scientia non olet · About LEMON Manuals