Front Brake Caliper: Disassembly

Using a screwdriver, remove the set ring and cylinder boot from the caliper.

Fig 1: Removing Ring And Cylinder Boot From Caliper Using Screwdriver

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Place a piece of cloth or similar, between the piston and the caliper.
2. Use compressed air to remove the piston from the cylinder.

Fig 2: Removing Piston From Cylinder

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Using a screwdriver, remove the piston seal from the cylinder.

Fig 3: Removing Piston Seal Using screwdriver

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002