LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2005 >> ECHO 2D Sedan, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Brake Booster Assembly >> On-Vehicle Inspection

On-Vehicle Inspection

  1. OPERATING CHECK 
    1. Depress the brake pedal several times with the engine off and check that there is no change in the pedal reserve distance.
    2. Depress the brake pedal and start the engine. If the pedal goes down slightly, operation is normal.
    Fig 1: Depressing Brake Pedal (1 Of 2)
    G02575584Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. AIR TIGHTNESS CHECK 
    1. Start the engine and stop it after 1 or 2 minutes. Depress the brake pedal several times slowly.

      If the pedal goes down farthest the 1st time, but gradually rises after the 2nd or 3rd time, the booster is air tight.

    2. Depress the brake pedal while the engine is running, and stop the engine with the pedal depressed. If there is no change in the pedal reserve travel after holding the pedal for 30 seconds, the booster is air tight.
    Fig 2: Depressing Brake Pedal (2 Of 2)
    G02575585Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals