LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2005 >> Camry Base, Automatic >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Brakes - Abs With EBD (DENSO Made) - Diagnostics >> Freeze Frame Data Of Abs

Freeze Frame Data Of Abs

  1. FREEZE FRAME DATA 
    1. The vehicle (sensor) status at the occurrence of an abnormality of the diagnosis code and during ABS operation can be memorized and displayed using the hand-held tester.
    2. Only one record of freeze frame data is stored, however, freeze frame data during ABS operation is always updated. Once freeze frame data is stored, up to 31 ignition "ON" operations are stored and displayed.

      HINT:

      If the ignition switch "ON" operation exceeds 31 times, "31" appears on the display.

    3. If a diagnosis code abnormality occurs, freeze frame data at the occurrence of the abnormality is stored but the ABS actuation data is deleted.
      FREEZE FRAME DATA

      Hand-held Tester Display Measurement Item Reference Value(1)
      VEHICLE SPD Wheel speed sensor reading Speed indication of a meter
      STOP LIGHT SW Stop light switch signal Stop lamp switch ON: ON, OFF: OFF
      # IG ON The number of turning the ignition switch ON after freeze frame data is memorized O to 31
      SYSTEM System status ABS activated: ABS BA activated: BA
      TROUBLE CODE Freeze DTC min.: O max.: 255
      (1) If no conditions are specifically stated for "Idling", it means the shift lever is in the N or P position, the A/C switch is OFF and all accessory switches are OFF.
scientia non olet · About LEMON Manuals