LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> MR2 C56 >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Automatic Transmission Diagnosis - U140E & U140F) >> Description & Operation >> Electronic Control Module Output Devices >> Shift Solenoids SL1, SL2 & S4

Shift Solenoids SL1, SL2 & S4

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Toyota RAV4, 2002 Toyota Highlander, 2002 Toyota Camry, 2002 Lexus RX 300, and 2001 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

ECM controls transaxle shifting by delivering an output signal to operate proper shift solenoid. Solenoids are located on transaxle valve body. See Figure. Solenoids are operated in accordance with selector lever position. If a solenoid malfunctions, ECM defaults transaxle to a designated gear. See Figure.

NOTE: ECM provides a fail-safe system which places transaxle in a designated gear depending on which solenoid fails. In some gears, fail-safe system will not be activated and transaxle will shift to the fail-safe gear. See Figure.
scientia non olet · About LEMON Manuals