Method For Position Adjustment
WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
- Start engine. Run the engine for at least 10 seconds.
- Stop vehicle and move A/T shift selector to N position with brake pedal depressed. Stay in N for at least 2 seconds.
- Turn 4WD shift switch to 2WD position. Stay in 2WD for at least 2 seconds.
- Turn ignition switch OFF.
- Start engine.
- Erase self-diagnosis. Refer to " CONSULT FUNCTION (ALL MODE AWD/4WD) ".
- Check 4WD shift indicator lamp. Refer to
" PRELIMINARY CHECK
".
If 4WD shift indicator lamp does not indicate 2WD, install new transfer control unit and retry the above check.