Clearance Adjustment
WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
- Open sunshade assembly.
- Loosen glass lid securing screws (two each on left and right sides), then tilt glass lid down.
- Manually adjust glass lid from outside of vehicle to achieve "A - A", "B - B" and "C - C" clearance specifications.
- After adjusting glass lid tilt glass lid up and tighten screws.
- Tilt glass lid up and down several times to check that it moves smoothly.