Removal and Installation of Hood Lock Control: Removal
WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the hood lock assembly bolts.
- Disconnect the hood lock release cable from the hood lock and unclip it from the radiator core support upper and hoodledge.
- Remove the bolt and the hood opener.
- Remove the grommet from the dash lower and pull the hood lock release cable toward the passenger compartment.CAUTION: While pulling, be careful not to damage the outside of the hood lock release cable, keep the radius 100 mm (3.94 in) or more.