LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 932 (Door & Lock (Without Intelligent Key System)) >> Removal And Installation >> Hood >> Fitting Adjustment >> Hood Lock Adjustment

Hood Lock Adjustment

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front grille. Refer to "REMOVAL AND INSTALLATION ".
  2. Move the hood lock to the left or right so that striker center is vertically aligned with hood lock center (when viewed from vehicle front).
  3. Make sure the secondary latch is properly engaged with the secondary striker with hood's own weight by dropping it from approx. 200 mm (7.87 in) height or by pressing it lightly approx. 3 kg (29 N, 7 lb).
    CAUTION: Do not drop the hood from 300 mm (11.81 in) height or higher.
  4. After adjusting hood lock, tighten the lock bolts to the specified torque.
  5. Install the front grille. Refer to "REMOVAL AND INSTALLATION ".
    Fig 1: Identifying Hood Lock Adjustment Dimension
    G04902441Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals