Component Function Check
WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Signal Tech II (J-50190) can be used to test the remote keyless entry keyfob relative signal strength. Refer to the Signal Tech II User Guide for additional information.
- CHECK FUNCTION
With CONSULT
Check remote keyless entry receiver by pressing the keyfob lock and unlock buttons then monitoring KEYLESS LOCK, KEYLESS UNLOCK in Data Monitor mode with CONSULT.
Monitor item Condition KEYLESS LOCK LOCK :ON UNLOCK :OFF KEYLESS UNLOCK LOCK :OFF UNLOCK :ON Is the inspection result normal?
YES: Keyfob is OK.
NO: Refer to "DIAGNOSIS PROCEDURE ".