LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 932 (Door & Lock (Without Intelligent Key System)) >> Power Supply And Ground Circuit >> Hazard Function >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK HAZARD SWITCH CIRCUIT 

    Operate the hazard lights by turning ON the hazard warning switch.

    Do the lights operate normally? 

    YES: Replace the BCM. Refer to "REMOVAL AND INSTALLATION ".

    NO: Repair or replace hazard warning switch circuit. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals