LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 932 (Door & Lock (Without Intelligent Key System)) >> Ecu Diagnosis Information >> Back Door Control Unit >> Reference Value >> Physical Values

Physical Values

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
Terminal Wire Color Item Condition Voltage (V) (Approx.)
1 B Ground - -
2 B Ground - -
3 Y/R Battery power supply - Battery voltage
4 G Hazard lamp output Request to flash hazards Pulse must be >50ms but less than 250ms
G04902547
5 B/P Pinch strip ground - -
6 R Warning chime output Back door motor active Battery voltage
7 G/R Ignition switch Ignition switch ON Battery voltage
Ignition switch OFF 0
8 GR/B Back door close switch Close position ON 0
Neutral position OFF Battery voltage
9 L Warning chime ground - -
10 L/B Battery power - Battery voltage
11 Y Cinch latch motor CLOSE output Back door close operation Battery voltage
12 L Closure motor RETURN output Back door release operation Battery voltage
13 P/L Back door close switch Cancel position 0
Neutral position 5
14 P Close switch signal While fully opening back door
G04902548
15 O/L Open switch signal While fully closing back door
G04902548
17 GR Glass hatch ajar signal Glass hatch OPEN 0
Glass hatch CLOSED 5
18 GR/R Park switch P or N position (Ignition is ON) 0
Other (Ignition is ON) 9
19 BR/B Pinch strip RH Detecting obstruction 0
Other 5
20 V/G Pinch strip LH Detecting obstruction 0
Other 5
21 W/V Power window serial link -
G04903931
22 BR Half switch signal Back door half latch position
G04902551
23 L/W Power liftgate switch ON 0
OFF Battery voltage
26 V Outside handle signal Back door handle switch (at rest) Battery voltage
Back door handle switch (open) 0