LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 931 (Wiper & Washer) >> DTC/Circuit Diagnosis >> Front Wiper Auto Stop Signal Circuit >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FRONT WIPER (AUTO STOP) SIGNAL 

    CONSULT DATA MONITOR

    1. Select "FR WIPER STOP" of IPDM E/R data monitor item.
    2. Operate the front wiper.
    3. Check that "FR WIPER STOP" changes to "ON" and "OFF" linked with the wiper operation.
      Monitor item Condition Monitor status
      FR WIPER STOP Front wiper motor Stop position ON
      Except stop position OFF

      Is the status of item normal? 

      YES: Front wiper auto stop signal circuit is normal.

      NO: Refer to "DIAGNOSIS PROCEDURE ".