Component Function Check

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

CHECK BATTERY SAVER OUTPUT/POWER SUPPLY FUNCTION
WITH CONSULT
1. Turn ignition switch ON.
2. Turn each interior room lamp ON.
  - Front room/map lamp assembly
  - Vanity lamps
  - Personal lamp 2nd row
  - Personal lamp 3rd row
  - Cargo lamp
3. Open the driver door to turn ON the step lamps and puddle lamps.
  - Front step lamps
  - Rear step lamps
  - Foot lamps (if equipped)
  - Puddle lamps (if equipped)
4. Select "BATTERY SAVER" of BCM (BATTERY SAVER) active test item.
5. While operating the test item, check that each interior room lamp turns ON/OFF.
  OFF: Interior room lamp OFF
  
  ON: Interior room lamp ON
  
  Is the inspection result normal?
  
  YES: Battery saver output/power supply circuit is normal.
  
  NO: Refer to "DIAGNOSIS PROCEDURE ".