LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 925 (Automatic Drive Positioner) >> DTC/Circuit Diagnosis >> Sliding Switch >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK SLIDING SWITCH 
    1. Turn ignition switch OFF.
    2. Disconnect power seat switch LH.
    3. Check continuity between power seat switch LH terminals.
      Terminal Condition Continuity
      Power seat switch LH
      7 1 Sliding switch (backward) Operate Yes
      Release No
      5 Sliding switch (forward) Operate Yes
      Release No
      Fig 1: Checking Continuity Between Power Seat Switch LH Terminals
      G05936890Courtesy of NISSAN NORTH AMERICA, INC.

      Is the inspection result normal? 

      YES: Inspection End.

      NO: Replace power seat switch LH. Refer to "DISASSEMBLY AND ASSEMBLY ".