LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 925 (Automatic Drive Positioner) >> DTC/Circuit Diagnosis >> Seat Memory Switch >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK SEAT MEMORY SWITCH 
    1. Turn ignition switch OFF.
    2. Disconnect seat memory switch.
    3. Check continuity between seat memory switch terminals.
      Terminal Condition Continuity
      Seat memory switch
      4 1 Memory switch 1 Push Yes
      Release No
      2 Memory switch 2 Push Yes
      Release No
      3 Set switch Push Yes
      Release No

      Is the inspection result normal? 

      YES: Inspection End.

      NO: Replace seat memory switch. Refer to "REMOVAL AND INSTALLATION ".

      Fig 1: Checking Seat Memory Switch
      G04903056Courtesy of NISSAN NORTH AMERICA, INC.