LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 925 (Automatic Drive Positioner) >> DTC/Circuit Diagnosis >> Reclining Switch >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK RECLINING SWITCH 
    1. Turn ignition switch OFF.
    2. Disconnect power seat switch LH.
    3. Check continuity between power seat switch LH terminals.
      Terminals Condition Continuity
      Power seat switch LH
      7 3 Reclining switch (backward) Operate Yes
      Release No
      4 Reclining switch (forward) Operate Yes
      Release No

      Is the inspection result normal? 

      YES: Inspection End.

      NO: Replace power seat switch LH. Refer to "DISASSEMBLY AND ASSEMBLY ".

      Fig 1: Checking Reclining Switch
      G05936894Courtesy of NISSAN NORTH AMERICA, INC.