PASSENGER SIDE: Component Function Check

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select "MIR/SEN RH U-D", "MIR/SEN RH R-L" in "Data monitor" with CONSULT.

Check the mirror sensor RH signal under the following conditions.

Monitor item	Condition		Value
MIR/SEN RH U-D	Door mirror RH	Close to peak	3.4V
MIR/SEN RH U-D		Close to valley	0.6V
MIR/SEN RH R-L		Close to right edge	3.4V
MIR/SEN RH R-L		Close to left edge	0.6V

Is the indication normal?

YES: Inspection End.

NO: Perform diagnosis procedure. Refer to "PASSENGER SIDE: DIAGNOSIS PROCEDURE ".