LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 923 (Power Window Control System) >> DTC/Circuit Diagnosis >> Rear Power Vent Window Motor LH Circuit Check >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Regarding Wiring Diagram information, refer to "WIRING DIAGRAM ".

  1. CHECK REAR POWER VENT WINDOW LH SIGNAL 
    1. Turn ignition switch OFF.
    2. Disconnect rear power vent window motor LH.
    3. Turn ignition switch ON.
    4. Check voltage between rear power vent window motor LH connector B52 terminals 1, 2 and ground.
      Connector Terminals Condition Voltage (V) (Approx.)
      (+) (-)
      B52 1 Ground Opening Battery voltage
      Closing 0
      2 Opening 0
      Closing Battery voltage
      Fig 1: Checking Voltage Between Rear Power Vent Window Motor LH Connector B52 Terminals 1, 2 And Ground
      G05382369Courtesy of NISSAN NORTH AMERICA, INC.

      Is the inspection result normal? 

      YES: Replace rear power vent window motor LH. Refer to "REMOVAL AND INSTALLATION (WITH REAR POWER VENT WINDOWS) ".

      NO: Repair or replace harness.