LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 922 (Audio, Visual, Navigation System (Base Audio)) >> Ecu Diagnosis Information >> Display Unit >> Reference Value >> Physical Values

Physical Values

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
Terminal (Wire color) Description Condition Reference value (Approx.)
+ - Signal name Input/Output
1 (B) Ground Ground - Ignition switch ON - 0V
2 (BR/Y) Ground Inverter VCC Input Ignition switch ACC - 9V
3 (B/O) Ground Signal VCC Input Ignition switch ACC - 9V
4 (BR) Ground AUX image ground - Ignition switch ON - 0V
5 - Shield - - - -
6 (B) Ground RGB signal (G: green) Input Ignition switch ON Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen.
G08693614
7 - Shield - - - -
8 (W/L) Ground Horizontal synchronizing (HP) signal Output Ignition switch ON -
G08693615
9 (O) Ground RGB area (YS) signal Input Ignition switch ON At RGB image displayed 5V
At rear view camera image displayed
G08693616
11 (V) Ground Communication signal (CONT→DISP) Input Ignition switch ON When adjusting display brightness
G08693617
13 (B) Ground Inverter ground - Ignition switch ON - 0V
14 (G/O) Ground Signal ground - Ignition switch ON - 0V
15 (Y) Ground AUX image signal Input Ignition switch ON When AUX mode is selected
G08693618
16 (G) - AUX image synchronizing signal Input - - -
17 (W) Ground RGB signal (R: red) Input Ignition switch ON Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen.
G08693619
18 (R) Ground RGB signal (B: blue) Input Ignition switch ON Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen.
G08693620
19 (W) Ground RGB synchronizing signal Input Ignition switch ON -
G08693621
20 (O/L) Ground Vertical synchronizing (VP) signal Output Ignition switch On -
G08693622
21 - Shield - - - -
22 (LG) Ground Communication signal (DISP→CONT) Output Ignition switch ON When adjusting display brightness
G08693623
23 - Shield - - - -