LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 922 (Audio, Visual, Navigation System (Base Audio)) >> Ecu Diagnosis Information >> BLUETOOTH® Control Unit >> Reference Value >> Physical Values

Physical Values

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
Terminal (wire color) Description Condition Reference value (Approx.)
+ - Signal name Input/output
1 (Y) Ground Battery power Input - - Battery voltage
2 (V) Ground ACC power Input Ignition switch ACC/ON - Battery voltage
3 (G/R) Ground IGN power Input Ignition switch ON/START - Battery voltage
4 (B/W) Ground Ground - Ignition switch ON - 0V
6 - Shield - - - -
7 (B) 8 (R/L) MIC in signal Input - - -
9 (G) 10 (R) Audio out Output Ignition switch ACC/ON Bluetooth control unit sends audio signal
G08693625
20 (B) Ground Ground - - - 0V
23 (B) Ground Ground - - - 0V
28 (W/R) Ground Vehicle speed signal (8-pulse) Input Ignition switch ON When vehicle speed is approx. 40 km/h (25 MPH)
G08693626
29 (R/W) Ground Microphone power Output Ignition switch ON - 5V
33 (B) - Bluetooth antenna - - - -
34 (B) - Bluetooth antenna - - - -
35 (W/L) - M-CAN1-H - - - -
36 (Y/L) - M-CAN1-L - - - -