Physical Values
WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
| Terminal (Wire color) | Description | Condition | Reference value (Approx.) | |||
|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | |||
| 2 (L/W) | 3 (L/R) | Sound signal front door speaker and front tweeter LH | Output | Ignition switch ON | Audio output | |
| 4 (SB) | 5 (B/Y) | Sound signal rear door speaker and rear tweeter LH | Output | Ignition switch ON | Audio output | |
| 6 (Y) | Ground | Steering switch signal A | Input | Ignition switch ON | Press and hold SOURCE switch. | 0V |
| Press and hold Δ switch. | 1.0V | |||||
| Press and hold DOWN TRIANGLE switch. | 2.0V | |||||
| Press and hold |
3.0V | |||||
| Except for above. | 5.0V | |||||
| 7 (V) | Ground | ACC power supply | Input | Ignition switch ACC | - | Battery voltage |
| 9 (R/L) | Ground | Illumination signal | Input | OFF | Lighting switch is OFF. | 0V |
| Lighting switch is ON. | 12V | |||||
| 11 (W/B) | 12 (L/B) | Sound signal front door speaker and front tweeter RH | Output | Ignition switch ON | Voice output | |
| 13 (O/L) | 14 (R/L) | Sound signal rear door speaker and rear tweeter RH | Output | Ignition switch ON | Voice output | |
| 15 | Ground | Steering switch signal GND | - | Ignition switch ON | - | 0V |
| 16 (BR) | Ground | Steering switch signal B | Input | Ignition switch ON | Press and hold |
0V |
| Press and hold |
1.0V | |||||
| Press and hold |
2.0V | |||||
| Except for above | 5.0V | |||||
| 19 (Y) | Ground | Battery power supply | Input | Ignition switch OFF | - | Battery voltage |
| 20 (B) | Ground | Ground | - | Ignition switch ON | - | 0V |
| 34 (B) | Ground | Antenna amp. ON signal | Output | Ignition switch ACC | - | 12V |
| 35 (B) | - | Amplified window antenna signal | Input | - | - | - |
| 36 (Y) | Ground | AUX image signal | Output | Ignition switch ON | When AUX mode is selected | |
| 37 (BR) | Ground | AUX image ground | - | Ignition switch ON | - | 0V |
| 38 (R) | Ground | RGB signal (B: blue) | Output | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 39 (B) | Ground | RGB signal (G: green) | Output | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 40 (W) | Ground | RGB signal (R: red) | Output | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 41 (W) | Ground | RGB synchronizing signal | Output | Ignition switch ON | - | |
| 42 | - | RGB synchronizing ground | - | Ignition switch ON | - | 0V |
| 43 (O) | Ground | RGB area (YS) signal | Output | Ignition switch ON | RGB image | 5V |
| AUX image | ||||||
| 44 (LG) | Ground | Communication signal (DISP→CONT) | Input | Ignition switch ON | When adjusting display brightness | |
| 45 (W/L) | Ground | Horizontal synchronizing (HP) signal | Input | Ignition switch ON | - | |
| 46 (G/O) | Ground | Signal ground | - | Ignition switch | - | 0V |
| 47 (B/O) | Ground | Signal VCC | Output | Ignition switch ACC | - | 9V |
| 49 | - | Shield | - | - | - | - |
| 50 | Ground | RGB ground | - | Ignition switch ON | - | 0V |
| 55 | - | Shield | - | - | - | - |
| 56 (V) | Ground | Communication signal (CONT→DISP) | Output | Ignition switch ON | When adjusting display brightness | |
| 57 (O/L) | Ground | Vertical synchronizing (VP) signal | Input | Ignition switch On | - | |
| 58 (B) | Ground | Inverter ground | - | Ignition switch ON | - | 0V |
| 59 (BR/Y) | Ground | Inverter VCC | Output | Ignition switch ACC | - | 9V |
| 66 (W) | Ground | AUX image signal | Input | Ignition switch ON | AUX image displayed | |
| 73 | - | Shield | - | - | - | - |
| 74 (B) | Ground | AUX image signal ground | - | Ignition switch ON | 0 V | |
| 80 (G) | 79 (R) | Bluetooth® voice signal | Input | Ignition switch ON | During voice guide output with |
|
| 81 | - | Shield | - | - | - | - |
| 85 (B) | Ground | Ground | - | Ignition switch ON | - | 0V |
| 86 (L) | - | CAN-H | Input/Output | - | - | - |
| 87 (P) | - | CAN-L | Input/Output | - | - | - |
| 88 (W/L) | - | AV communication signal 1 (H) | Input/Output | - | - | - |
| 89 (P/B) | - | AV communication signal 1 (L) | Input/Output | - | - | - |
| 90 (L/W) | - | AV communication signal 2 (H) | Input/Output | - | - | - |
| 91 (B/P) | - | AV communication signal 2 (L) | Input/Output | - | - | - |
| 94 | - | Shield | - | - | - | - |
| 95 (R) | 97 (B) | AUX audio signal RH | Input | Ignition switch ON | When AUX mode is selected | |
| 96 (W) | 97 (B) | AUX audio signal LH | Input | Ignition switch ON | When AUX mode is selected | |
| 100 | - | Shield | - | - | - | - |
| 103 (SB) | Ground | CD eject signal | Input | - | Pressing the eject switch | 0V |
| Except for above | 3.3V | |||||
| 104 (G/R) | Ground | Ignition signal | Input | Ignition switch ON | - | Battery voltage |
| 105 (G/W) | Ground | Reverse signal | Input | Ignition switch ON | R position | Battery voltage |
| Other than R position | 0V | |||||
| 106 (G) | Ground | Parking brake signal | Input | Ignition switch ON | Parking brake ON | 0V |
| Parking brake OFF | Battery voltage | |||||
| 107 (W/R) | Ground | Vehicle speed signal (8-pulse) | Input | Ignition switch ON | When vehicle speed is approx. 40 km/h (25MPH) | |
| 121 (W) | - | V BUS signal | - | - | - | - |
| 122 (G) | - | USB ground | - | - | - | - |
| 123 (L) | - | USB D+ signal | - | - | - | - |
| 124 (R) | - | USB D- signal | - | - | - | - |
| 125 | - | Shield | - | - | - | - |