LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 921 (Ventilation System) >> Removal And Installation >> Variable Blower Control >> Removal and Installation >> Front Variable Blower Control >> Removal

Front Variable Blower Control: Removal

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the glove box assembly. Refer to "REMOVAL AND INSTALLATION ".
  2. Disconnect the variable blower control electrical connector.
  3. Remove the two screws and remove the variable blower control.
scientia non olet · About LEMON Manuals