LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 921 (Ventilation System) >> Removal And Installation >> Intake Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument lower panel RH and glove box. Refer to "REMOVAL AND INSTALLATION ".
  2. Disconnect the intake sensor electrical connector.
    NOTE: The intake sensor is located on the top of the front heater and cooling unit assembly next to the A/C evaporator cover.
  3. Pull up on the intake sensor to remove the intake sensor from the front heater and cooling unit assembly.
    Fig 1: Identifying Intake Sensor And Front Heater And Cooling Unit Assembly
    G04903481Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals