LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 918 (Audio, Visual, Navigation System (BOSE Audio) (With Navigation)) >> Removal And Installation >> Av Control Unit >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Before replacing AV control unit, perform "READ CONFIGURATION" to save current vehicle specification. Refer to "CONFIGURATION (AV CONTROL UNIT): DESCRIPTION ".
  1. Remove cluster lid C. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the AV control unit screws.
  3. Remove the AV control unit.
  4. Remove the A/C and AV switch assembly from cluster lid C (if necessary).
    CAUTION: Only remove and replace the A/C or AV switch assembly knobs if damaged or missing. The knobs must not be removed from switches when removing and installing the A/C or AV switch assembly to prevent damage to the switch assembly.