LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 918 (Audio, Visual, Navigation System (BOSE Audio) (With Navigation)) >> DTC/Circuit Diagnosis >> USB Connector >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Regarding Wiring Diagram information, refer to "WIRING DIAGRAM ".

  1. CHECK USB INTERFACE HARNESS CONTINUITY 
    1. Turn ignition switch OFF.
    2. Disconnect AV control unit connector M173 and USB interface connector M214.
    3. Check continuity between AV control unit connector M173 and USB interface connector M214.
      AV control unit USB interface Continuity
      Connector Terminal Connector Terminal
      M173 127 M214 4 Yes
      128 1
      129 3
      130 2
      131 5
    4. Check continuity between AV control unit connector M173 and ground.
      AV control unit - Continuity
      Connector Terminal
      M173 127 Ground No
      129

      Is the inspection result normal? 

      YES: Replace the USB interface. Refer to "REMOVAL AND INSTALLATION ".

      NO: Repair or replace harness or connectors.