LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 914 (Front Suspension) >> Removal And Installation >> Stabilizer Bar >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine under cover using power tool. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove stabilizer bar mounting bracket bolts and connecting rod nuts using power tool, as shown below.
  3. Remove bushings from stabilizer bar.
    Fig 1: Locating Stabilizer Bar Mounting Bracket Bolts And Connecting Rod Nuts
    G04902069Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals